UV Flame Detector RFD-UVS is a UV only Flame Detector identify fire by sensing radiation energy in the short wave section of UV wave lengths.
- A UV flame detector with a single sensor is a specialized device used in industrial combustion systems to detect and monitor flames. It utilizes ultraviolet (UV) radiation to identify the presence of a flame, triggering actions like shutting off fuel lines or sounding alarms. These detectors are particularly useful in scenarios where rapid flame detection and response are critical for safety.
Highlights
- UV single sensor.
- Rapid Fire detection.
- Compact sized flame detector.
- UV Flame Detector RFD-UVS is suitable for small areas such as boiler room.
Specification
[ General ]
- Spectral Response : Ultraviolet
- Detection Range : 3 m for lighter
- Response Characteristics : Typical 2 seconds
- Temperature Range : Operating : -40℃ to +80℃
- Humidity Range : 0 to 95 % relative humidity
[ Electrical ]
- Operating Voltage : Typical DC24 V (18 to 32).
- Power Consumption : 1.6 W maximum at 32 vdc.
- Wiring : 24 AWG (0.205 mm2) cable recommended.
- Electromagnetic Compatibility : EMC protected.
[ Output ]
- Open Collector Fire Alarm : 0 Vdc
- Normal : 24 Vdc
[ Mechanical ]
- Dimensions : burn type : 39 mm (pi) x 64.5 mm (H)
- normal type : 39 mm (pi) x 64.5 mm (H)
- Enclosure Material : Aluminum alloy
- Weight: 0.2 kg
- Color : silver
[ Approvals ]
- Water and dust tight : IP66 (option)
Certificates and Documents
